The History of Water Purification Systems

Water can be purified in more ways than one. You may be wondering how water is cleaned. Basically, water goes through a lot of stages before it is considered safer for regular consumption. According to the WHO reports, around 0.8 million people die each year from drinking contaminated water. These deaths could be prevented by providing clean drinking water. Read on to find out more.

In tap water, there is a lot of bacteria, algae, ions and chemical particles. Based on the consumption purpose, you can choose from different water purification methods. The infiltration process screens water for many particles, such as stones. They are removed during this stage.

The sedimentation process involves the use of a clarifier. The purpose of this process is to remove amorphous metal hydroxide. According to a study, if you remove essential minerals from your drinking water, you may suffer from urinary and digestive issues.

Sand filters are used for biological processes. Basically, this process involves the use of sand during the filtration process. After water passes through the sand filters, it becomes safe for everyone to drink.

Sand filters are quite popular as they help filter smallest elements. Therefore, they have been quite popular since 1800s. Over the years, researchers improved this method to ensure better results.

For water purification, the two common chemical processes are used. They are known as flocculation and chlorination. In these methods, chemical components are added to the dirty water to clear it from unwanted particles. They include inorganic particles as well.

Another most common method includes chlorine disinfection. However, the downside is that chlorine is not good for your health. Usually, chlorine is used in swimming pools. In 1854, cholera became epidemic in London. Then chlorine was used for water disinfection. It was used to disinfect the supply lines of water.

In 1879, another expert William Soper treated typhoid patients using chlorinated lime. Since there were a huge number of casualties, the technique of long-term water chlorination was used.

We don’t use the old sand filters anymore. Today, we use chlorine of lime to put an end to this type of epidemics. As far as efficacy is concerned, this method is quite good. Plus, it’s also quite safe for both you and your kids. However, the amount of chlorine in water should be less than 2 PPM.

In the US military, calcium hypochlorite is put in a Lister bag as an effective means of disinfecting drinking water.

Today, boiling water is still the common method to purify water. Home users are still following this practice in order to kill microorganisms found in water. All you need to do is wrap a used piece of rag around the water hose, and it will help you achieve the purpose.

In short, this was a description of some common methods of water disinfection. However, if you are looking for the best approach to ensure your drinking water is pure, you can use a water disinfectant machine. Another effective way is to use a reverse osmosis system.

A disinfectant water machine can be used in order to disinfect drinking water. You can check out these systems at https://www.olansi.net/disinfectant-water-machine-2/.

Article Source: https://EzineArticles.com/expert/Arthur_Huang/2682732

Article Source: http://EzineArticles.com/10281967

Leave a Reply

Your email address will not be published. Required fields are marked *